High Pressure Water Jetting can achieve the same surface removal results as shot blasting but without the dust and blast media contamination. With pressures up to 50,000 psi cleaning speeds are impressive.

Surface Preparation with specialist floor and deck cleaners for stripping rust and old coatings the contamination levels are small, optional vacuum recovery. Suitable to remove loose flaking paint or build ups of grease or oil, moving onto heavier applications of rust blisters and flaking paint without disturbing tightly bonded paint. Finally complete removal down to bare metal – 'Ultra High Pressure'.

Marine Barnacles, & marine growth, loose paint & rust on ship’s hulls, platforms, docks. Ballast & storage tanks & boilers, tube cleaning.

Highway Maintenance Expansion joints; paint stripes. Mud, grease, vegetation, tar, cement or asphalt on vehicles & machinery. Stains, tar & mastics on concrete bridges & overpasses; graffiti. Unstop culverts on bridges & clean up overspills.

Construction Concrete, tar, asphalt, mortar, dirt grease, mastic on vehicles, mix trucks & machinery. Asphalt distributors, mixers & tar cookers. Latents for dams, lifts, canals & runways prior to pours (cleaning rebar). Exposing aggregate (retarded). Exposing aggregate (unretarded); concrete cutting.

Pulp and Paper Liquor, evaporator; drain lines. Wood pulp, oil, grease, pitch dirt from tubes,
press sections of machines, suction rolls, heat exchangers, stock chests & lines.

Main picture courtesy Lydia Frenzel